Introduction: Sicong Liu received the B.S. degree (with Hons.) in Mechanical Design Manufacturing and Automation from the Harbin Institute of Technology (HIT) in 2009, the M.S. degree in Mechanical Design and Theory from HIT in 2011, and the Ph.D. degree in Robotics and Engineering Mechanics from Nanyang Technological University (NTU), Singapore, 2015. He worked as Mechanical Engineer in DJI, developed the world’s smallest three-axis gimbal camera OSMO Pocket. As a senior mechanical engineer in UBTECH, he designed and produced the robotic hand for the humanoid robot Walker2. His research experience includes deployable structures inspired by Origami, soft robotics, three-axis gimbal system and humanoid robots. He joined Southern University of Science and Technology (SUSTECH) in Aug. 2019, as Research Assistant Professor in the Department of Mechanical and Energy Engineering. His research focus on the soft robotics and origami mechanisms.
Education:
◆04/2015-05/2016
Post-Doc. Development of Dynamic Bolts, DSTA/Nanyang Technological University (NTU)
◆08/2010-03/2015
Ph.D. Robotics and Engineering Mechanics, NTU
◆09/2009-07/2011
M.Sc. Mechanical Design and Theory, HIT
◆08/2005-07/2009
B.Sc. Mechanical Design Manufacturing and Automation, HIT
Work Experience:
◆08/2019-Now
Research Assistant Professor, MEE, SUSTECH
◆08/2018-08/2019
Senior Mechanical Engineer, UBTECH
◆08/2017-08/2018
Mechanical Engineer, DJI
Work Achievements:
◆Development of dexterous hands for humanoid robot, Ubtech
◆Handhold gimbal-camera design and modal simulation, DJI
Research Projects:
◆Development of Conceptual Design of Dynamic Bolts, NTU
◆Experimental and Numerical Analysis on Fold Core, NTU
◆Kinematics of Deployable Structures, NTU
Journal publication :
[1] Y. Juan, X. Chen, C. Song, J. Zhou, Y. Liu, S.C. Liu, Z. Wang, "Customizable Three-Dimensional-Printed Origami Soft Robotic Joint With Effective Behavior Shaping for Safe Interactions," in IEEE Transactions on Robotics, vol. 35, no. 1, pp. 114-123, Feb. 2019. doi: 10.1109/TRO.2018.2871440
[2] S.C. Liu, W.L. Lv, Y. Chen, G.X. Lu, Deployable Prismatic Structures with Origami Patterns, Journal of Mechanisms and Robotics, ASME, 2016, Vol. 8 / 031002.
[3] S.C. Liu, G.X. Lu, Y. Chen, Y.W. Leong, Deformation of the Miura-Ori Patterned Sheet, International Journal of Mechanical Sciences, 2015, 99: 130-142.
Conference:
[1] S.C. Liu, G.X. Lu, D.W. Shu, Y.X. Zhou, Z.Y. Zhao, A New Design of Energy Absorbing Bolt, Advances in Engineering Plasticity and its Application XIII (AEPA), Hiroshima, Japan, 2016.
[2] S.C. Liu, W.L. Lv, Y. Chen, G.X. Lu, Deployable Prismatic Structures with Origami Patterns, IDETC/CIE, ASME, Buffalo, USA, 2014.
[3] S.C. Liu, Y. Chen, G.X. Lu, the Rigid Origami Patterns for Flat Surface, IDETC/CIE, ASME, Portland, USA, 2013.
[4] S.C. Liu, Y. Chen, Folding the Tube with Rigid Origami Pattern, Japan Society for Industrial and Applied Mathematics (JSIAM), Kyoto, Japan, 2011.
SicongLiu
Research direction:Soft robotics，Origamic mechanisms
Postbox:liusc@sustech.edu.cn
Personal Homepage